SICK CLV490 Provozní pokyny stáhnout pdf (Strana 61)

Operating Instructions Chapter 5

CLV 490 Bar Code Scanner

8 008 796/0000/25-06-2002

5-15

Electrical installation

For connecting the host interface via the AMV/S 60 Connection Module, see the Operating

Instructions for the

"AMV/S 60 Connection Module"

(no. 8 008 296).

Terminating the RS 422 interface

The interface can be terminated in the Connection Module. See "

Operating Instructions for

the AMV/S 60, AMV 30.071, AMV 100/200",

"BMS 20 Connection Modules".

Activating the RS 232 interface:

The RS 232 interface can be activated with the "CLV-Setup" program:

1. Choose the H

OST

NTERFACE

tab.

2. Choose the RS 232 option from the H

ARDWARE

drop-down list under D

ATA

FORMAT

3. Download the data to the CLV by clicking in the toolbar.

The D

OWNLOAD

PARAMETERS

dialog box is displayed.

4. Confirm the dialog box by choosing P

ERMANENT

The CLV uses the RS 232 version of the host interface.

Tip The communication parameters can be changed, if necessary, on the H

OST

NTERFACE

tab.

To do so, change the values under D

ATA

ORMAT

and I

NTERFACE

ROTOCOL

5.5.5 Connecting the CAN interface

Instructions for the connection and for configuration of the CLV to use the device in the

SICK-specific CAN Scanner Network or in a CANopen network see the Operating Instruc-

tions

“Application of the CAN interface“

(no. 8 009 180, English edition).

5.5.6 Connecting the PC

The CLV is operated and configured with the PC-based "CLV-Setup" program. In order to do

so, you must connect the device to the PC via the terminal interface (auxiliary interface). Un-

like the host interface, the terminal interface has a permanent data format and a fixed data

transfer rate.

Fig. 5-3

shows how the terminal interface is connected. The cable length

should not be more than 10 m.

1. Switch off the PC and power supply to the SICK Connection Module.

2. Connect the PC to the internal, 9-pin "Service" plug on the Connection Module using an

RS 232 connecting cable, e. g. no. 2 014 054 (RxD and TxD crossed).

– or –

Without the SICK Connection Module:

Connect the PC as shown in

Fig. 5-3.

3. Switch on the PC and power supply to the SICK Connection Module.

Fig. 5-3: Connecting the terminal interface

RS 232

( ) = 9-pin Sub D

plug at PC

or 9-pin "Service"

AMV 60-011/AMS 60-012, -013

Terminal assignment

plug

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 213 214

Komentáře k této Příručce

Žádné komentáře

SICK CLV490 Provozní pokyny Strana 61

Komentáře k této Příručce

Související produkty a manuály pro Čtečky čárových kódů SICK CLV490